Iron and Steel Sheets, Plates and other construction materials dealer in Mumbai, India

M.S. Sheets (Mild Steel Sheets and Plates) are used in engineering applications and also in certain applications in the automotive sector. Mild Steel plates are economical to use in flooring and other structural applications. Plain sheets are mainly used in sheds of houses, automotive components, warehouses, electrical equipment etc. They are corrosion and abrasion resistance.

Sheets and plates are mostly used in automotive industries, electrical and electronic goods, panel applications and office equipment and furniture.

Some salient features of M.S. sheets are:

• Smooth surface 
• Corrosion resistance 
• Sturdy construction
• Cost effective

M.S. Plates are available in thickness ranging from 0.15 mm to 1.60 mm

Read More

Mild Steel Squares dealers in South Mumbai

M.S. Squares (Mild steel square bars) are plain in surface and have square sections which vary from 8 to 150 mm in either of their sides. These rods are manufactured in long lengths and are later cut and bent easily without causing any damage. The Rolling tolerance of M.S. Squares is same as that of M.S. round bars.

M.S. Squares are used widely for structural needs in domestic applications, furniture industry and automotive products.

Some of their applications are:

• Guide rails for material handling equipments
• Support bars for Domestic equipments
• Manufacturing of automotive vehicles
• Hardware Industry
• Petro-chemical Industry
• Construction applications
• Electric Instruments
• Boiler equipments
• Surgical equipments
• Food processing
• Water heating equipments
• Boat and Ship structures
• Power mill structures

 The ranges we deal in vary from 8x8 mm to 150x150 mm

Read More

Iron and Steel Rounds (Rods) supplier in Mumbai, India

M.S. Rounds (Mild steel rounds) are used for resisting tensile stress of RCC (Reinforced concrete cement) slab beams. These rods are plain in surface and have circular sections of diameter ranging from 6 to 50 mm. They are manufactured in long lengths which later can be cut and bent easily without causing any damage
.

Since M.S. Round Bars posses inherent strength due to their circular cross-section, they are widely used in  applications where multi-directional strength is crucial. They are used mainly in the reinforcement of concrete slabs and beams in constructional industry.

Our range of M.S. Round Bars is available in all sizes and grades and can be availed as per customer needs. Our ranges vary from 80 mm to 130 mm in diameter .

Read More

Galvanized Iron Pipes dealers and suppliers in Mumbai, India

G.I. Pipes (Galvanized Iron pipes) are steel pipes that have been covered with a layer of zinc metal by a process called 'Galvanizing'.  During galvanizing, steel is immersed in a molten zinc bath to ensure a hard, smooth barrier of Zinc coating on it. Zinc's natural corrosion resistance provides long-term protection against water corrosion in indoor and outdoor environments

G.I. pipes and tubes are used in building and structural materials all over the world. Users seeking long term structural performance in humid outdoor applications have turned to Galvanized steel pipes as they protect against the attack of water, humid or dry winds and road salts.

G.I. Pipes Indian Standards:

• Indian Standards: Specification IS: 1239 (Part-I) 1990 (Light, Medium & Heavy Series) Black & galvanized, plain end screwed and socketed up to 100 mm NB all series, 125 & 150 mm NB.
• Indian Standards: Specification IS: 1978-1982 up to 200 mm NB grade & YST - 170 and YST - 210.
• Indian Standards: Specification IS: 1161-1998 up to 150 mm NB grade & YST - 210 and YST - 240.
• Indian Standards: Specification IS: 3601-1984 up to 168.3 mm OD and 7.1 mm wall thickness.
• Indian Standards: Specification IS: 3589-1991 ERW Steel Tubes 150 mm to 400 mm NB.4.
• Indian Standards: Specification IS: 4270-1992 ERW Steel Tubes for water wells up to 300 mm NB.

 

 Applications:

G.I. steel pipes and tubes are used in Irrigation & Water Supply, Plumbing, Cold Storage Applications, Scaffolding, Antenna, Telecom Towers, Water Wells etc.

G.I. steel pipes and tubes are available in various size and shapes based on the customer's requirements. We deal in G.I. pipes of following ranges:

• IS:1239,
• IS:1161,
• IS:3601,
• IS:3589,
• IS:9295,
• IS:4270,
• IS:7138,
• IS:4923,
• IS:3074,
• BS:1387,
• BS:3601,
• BS:6323

Read More

Mild Steel Pipes and Tubes dealers and suppliers in Mumbai, India

M.S. Pipes (Mild Steel Pipes) are pipes made using mild steel containing carbon contents of less than 0.18%. Because of low carbon content they do not get hardened. Mild steel is available in a variety of structural shapes that can be easily welded into pipe, tube, tubing etc. Mild steel pipes and tubes are easy to fabricate, readily available, and cost less than most other metals. In well protected environments, the life expectancy of mild steel pipe is 50 to 100 years.

Mild Steel pipes and tubing are used for structural, mechanical & general engineering purposes. It is also used for drinking water supply.

Generally, these pipes are coated with metals such as copper, to protect them from corrosion.  The use of  sodium silicate and chlorination inhibit corrosion in mild steel pipes However, extra care is always required to prevent mild steel pipes from rusting.

Applications: 

Mild Steel pipes are used in furniture industries, domestic applications, bus body,  fencing, Structural Purposes, General Engineering Purposes, Water Steel Pipes.

M.S. Pipes Indian Standards:

•  IS 1239 
• Thread Dimension IS: 554: 1999 
• Idlers & Belt Conveyors IS:9295-1983 
• Steel Tubes IS: 1161-1998 
• Pipes conforming to IS:3589-2001 
• Square Steel Pipes As per IS:4923'97
• Rectangular Steel Pipes As per IS:4923'97 
• Lancing Pipes IS : 10577 : 1982 
• Steel Tubes for Water Wells IS:4270 
• Screwed & Socketed Butt Joints IS:4270:2001
• Steel Tubes IS : 3601-2006

Read More

Mild Steel Flat Bars and Sheets dealers in Mumbai, India

M.S. (Mild Steel) Flat Bars are used for general fabrication in making structures and frames. Mild steel flat bar can be easily cut and drilled, and are particularly suited for welding.

Examples of its uses include machinery manufacturing, iron towers, ship-building, railway spare-parts, steel structures, furniture making and boilers.

Some of the key features of Mild Steel Flat Bars include:

• corrosion resistance, 
• high functionality,
• high tensile strength, 
• resistance to chemicals,
• longer life.

We deal in a supply of wide variety of Mild Steel Flat Bars and Sheets. Please contact us for more details.

Read More