TMT Bars

TMT Bars

TMT (Thermo Mechanically Treated) steel bars are a newer variety of steel used for construction purposes.

M.S. (Mild Steel) Pipes and Rounds

M.S. (Mild Steel) Pipes and Rounds

They are available in various structures like pipes, tubes, tubings etc. Our ranges vary from 8 x 8 mm to 150 x 150 mm

Iron and Steel Rods

Iron and Steel Rods

Iron and Steel Rods are widely used in structural applications, Scaffolding, Antenna, Telecom Towers, Water Wells etc. They are available in various size and shapes based on the customers requirements.

Mild Steel Angles

Mild Steel Angles

M.S. (Mild Steel) Angels are made up in accordance with the international quality standards. They are available in ranges of (thickness size in mm) Equal in: 20 X 20, 30 X 30, 40 x 40, 50 x 50 and Unequal in: 30 X 20, 40 X 25, 45 X 30, 50 X 30

Pre Galvanzied Steel Pipes

Galvanized Iron Pipes (Galvanized Iron pipes)

Galvanized Iron Pipes are covered by a layer of zinc. Ranges available with us are: IS:1239, IS:1161, IS:3601, IS:3589, IS:9295, IS:4270, IS:7138, IS:4923, IS:3074, BS:1387, BS:3601, BS:6323

H Beams (I Beams)

H Beams (I Beams)

H Beams (I Beams) are used extensively in constructional activities. We deal in ISMB 80, ISMB 100, ISMB 120, ISMB 140

Steel T beams

Steel T beams

A T-beam is used widely in construction activities. It acts as a load-bearing structure of reinforced concrete, wood or metal, with a t-shaped cross section.

Iron and Steel Sheets

Iron and Steel Sheets

Iron and Steel Sheets and Plates are available in thickness from 0.15 mm to 1.60 mm. These plates are economical to use in flooring and other structural applications.

Mild Steel Channels

Mild Steel Channels

Mild Steel channels, produced using quality steel are well-polished so as to resist corrosion. They are available in ranges of (thickness in mm) 75 X 40, 100 X 50, 125 X 65, 150 X 75

Mild Steel Squares

Mild Steel Squares

M.S. Squares (Mild steel square bars) are plain in surface and have square sections which vary from 8 to 150 mm.

Authorized dealers of TMT Bars and TOR Steel in Mumbai, India

TOR Steel / CTD Bars The TOR steel is also called as Cold Twisted Deformed (CTD) Steel Reinforcement Bar. TOR Steel bars are bars made with surface deformations formed by twisting the steel after elongation. The elongation process increases 'yield strength' from 250 to say 500 MPa. The surface corrugations impart higher bondage with concrete. TOR steel is one of the best grade of steel used in concrete reinforcement. Note: TOR is a Brand Name originally marketed by TORISTEG STEEL CORPORATION of Luxembourg, Germany. TMT Bars TMT (Thermo Mechanically Treated) steel bars are relatively newer variety of steel used in construction....

Pages 41234 »
Related Posts Plugin for WordPress, Blogger...