Iron and Steel T-beam suppliers in Mumbai, India

A T-beam (Tee shaped beams) used primarily in construction Industry, is a load-bearing structure often used to reinforce concrete, wood or metal. It has a T-shaped cross section. The top of the T-shaped cross section serves as a flange or compression member in resisting compressive stresses.

The web of the beam below the compression flange provides resistance to shear stress and provides greater separation for the coupled forces of bending. The interacting flange and web produce the cross section having the typical T-shape.

The T-beam has a big disadvantage compared to an I-beam because it has no bottom flange with which to deal with tensile forces. One way to make a T-beam more efficient structurally is to use an inverted T-beam with a floor slab or bridge-deck joining the tops of the beams. Done properly, the slab acts as the compression flange.

Just like H-Beams, based on their flanges, I-Beams can be classified as:

1. Squared Beams (W cross-section)
2. Tapered Beams (S cross-section)

Read More

H beams / I beams and other construction materials dealer in South Mumbai, India

An I-beam, also known as H-beam is a beam with an I or H-shaped cross-section. These beams are widely used in construction activities.

 

Based on their flanges, they can be:

1. Squared Beams (W cross-section)
2. Tapered Beams (S cross-section)

In India, I-beams are designated as:

• ISMB - Indian Standard Medium Weight Beam,
• ISJB : Indian Standard Junior Beams,
• ISLB : Indian Standard Light Weight Beams,
• ISWB : Indian Standard Wide Flange Beams.

Pros:

The I-shaped section is a very efficient form for carrying both bending loads and shear loads. The center piece resists shear forces while the flanges resist most of the bending moment experienced by the beam.

Cons:

The cross-section has a reduced capacity in the transverse direction, and is also inefficient in carrying torsion, for which hollow structural sections are often preferred.

Beams are designated as per respective abbreviated reference followed by the depth of section such as for example ISMB 450, where 450 is the depth of section in millimeters (mm). The dimensions of these beams are classified as per 'Burea of Indian Standards'.

We deal in I Beams of following standard sizes:

• ISMB 80,
• ISMB 100,
• ISMB 120,
• ISMB 140

Read More

Mild Steel Channel dealers in South Mumbai, India

M.S. (Mild Steel) channels are widely used for structural support in construction industry. They are fabricated in various standard sizes and as per weight specifications. These channels are widely used in industries like construction projects, engineering works,metal works and petro-chemical industry.

M.S. channels are produced using high quality steel. They are manufactured using roll-formed metal in several shapes and sizes and are well-polished to resist corrosion.

The premium grade material of construction used in fabricating these channels imparts properties like:

• high performance, 
• resistance to corrosion, 
• material strength and 
• ease of installation.

We supply M.S. channels developed in compliance with the prevalent industry standards for quality by our suppliers. They are available in following ranges of (thickness size in mm):

• 75 X 40,
• 100 X 50,
• 125 X 65,
• 150 X 75

Read More

Dealers of wide range of Mild Steel Angles in Mumbai, India

M.S. Angles (Mild Steel Angles) are made up of high quality steel that imparts high tensile strength and resistivity to rust.

M.S. Angles are extensively used in fabrication processes and in industries like automobile, petrochemical, pharmaceutical and energy. These products are used in bracket and transmission line fabrications, trimming, framing and reinforcement of constructions.

We supply superior quality M.S. Angles available in different sizes and dimensions. They are easy to lubricate, sturdy and rust-free. We provide customized ranges as per client's specification at most competitive prices.

They are available in following ranges of (thickness size in mm).

• Equal:
• 20 X 20,
• 25 X 25,
• 30 X 30,
• 35 X 35,
• 40 x 40,
• 45 x 45,
• 50 x 50
• Unequal:
• 30 X 20,
• 40 X 25,
• 45 X 30,
• 50 X 30

Read More

Authorized dealers of TMT Bars and TOR Steel in Mumbai, India

TOR Steel / CTD Bars

The TOR steel is also called as Cold Twisted Deformed (CTD) Steel Reinforcement Bar. TOR Steel bars are bars made with surface deformations formed by twisting the steel after elongation. The elongation process increases 'yield strength' from 250 to say 500 MPa. The surface corrugations impart higher bondage with concrete. TOR steel is one of the best grade of steel used in concrete reinforcement.

Note: TOR is a Brand Name originally marketed by TORISTEG STEEL CORPORATION of Luxembourg, Germany.

TMT Bars

TMT (Thermo Mechanically Treated) steel bars are relatively newer variety of steel used in construction. Due to their Thermo-mechanical treatment, TMT Bars are highly rust and corrosion resistant, hence they are best suited in humid and coastal areas for construction.

TMT bars are also known as 'Quenched and Tempered re-bars', because of the quenching and tempering processes involved in making the bars. The quality of TMT bar depends on three major factors:
A] Quality of raw materials used,
B] An automated mill which is properly designed, and
C] A well-designed quenching and tempering process.

The softer core with a concentrated hardened periphery,  coupled with high elongation as required in seismic zones TMT Bars can have the desired tensile strengths. Depending on the size and grade, rebars with hardened periphery of about 15 to 30 per cent of the cross sectional area of the bar are ideal for civil constructions.

TMT Bars vs TOR Steel

TMT Bars give many advantages over other types of steel since 'Twisting operation' is not involved in their production. They offer better corrosion resistance since there are no residual stresses involved in therm.

Advantages of TMT Bars over TOR Steel:

1. TMT Bars offer better safety for structures since they have higher Strength and Ductility.
2. TMT Bars have greater ease of use due to better Ductility and Bend-ability. Pre-welded meshes can be made away from construction site. Avoiding manual binding at construction site reduces construction and fabrication cost and time.
3. Since TMT bars offer high thermal stability, they can be used in building structures with very high temperatures like Chimneys, Foundries etc.
4. The 'Cold twisting process' in formation of CTD bars causes surface stresses. On other hand, the TMT process gives TMT Bars superior strength and anti-corrosive properties. Hence TMT bars are better in resisting corrosion.
5. TMT bars have better work-ability and bend-ability since they have very high elongation values and consistent properties through out their length.
6. TMT bars offer better earthquake resistance than TOR Steel bars. TMT bars have high fatigue resistance to Dynamic and Seismic loads due to their soft ferrite-pearlite core. This makes them most suitable for use in earthquake prone areas.
7. TMT bars are more malleable than TOR Steel bars because of their flexible nature.
8. TMT bars have low carbon content in their composition, they can be used for welding joints without reduction in strength at the weld joints. Hence they are preferred for their fine welding features.
9. The external ribs running across the length of the TMT bars give them superior bonding strength between the bar and the concrete. They fulfill bond requirements as per IS: 456/78 and IS: 1786/85. Hence TMT bars offer better bonding strength
10. TMT bars are highly cost-effective as compared to TOR Steel bars. A combination of high tensile strength and better elongation value gives users better savings and reduced shipping and transportation costs.

Read More

Product Catalog - TMT Bars, TOR/CTD bars, H-Beams, I Beams, T-Beams, Mild Steel Angles, Channels, Squares, Pipes and Tubes, Iron and Steel Rods, Flats Sheets and Plates

We are engaged in supplying and distributing a wide range of Iron and Steel products that are procured from reliable and trusted vendors.

H Beams (I Beams)

TMT Bars

Iron and Steel Rods

Mild Steel Angles

We are authorized dealers of wide range of Iron and steel products, available in different sizes, some of which are mentioned below:

• TMT (Thermo Mechanically Treated) Bars
• Mild Steel TOR / CTD (Cold Twisted Deformed) steel bars
• H-Beams (I Beams) (I-shaped cross-section)
• T-Beams (Tee beams) (T-shaped cross-section)
• M.S. Angles (L-shaped cross-section)
• M.S. Channels (C-shaped cross-section)
• M.S. Rounds (Rods)
• M.S. Squares
• M.S. Pipes and Tubes
• G.I. Pipes
• M.S. Flats (Sheets and Plates)

Read More

Map - Our location on google map and Google place page

 Google Map:

View Larger Map

Read More

Contact us - Our contact numbers, email and office address

Call us:

Mobile:    +91-986-977-3013
Land-line:    +91-2386-5009
Care of:    +91-2381-3680

Drop an email:
For all business inquiries drop an email at

rajtraders52@gmail.com

Visit us:
We are located strategical in heart of Mumbai's Iron and Steel market. Our postal address is:

17, Maher Bazaar,
Kharwagali,
Opposite Akbar Peerbhoy College,
Mumbai - 400 004

You can find us on Google Maps:

Our Google place page
Latitude: 18.96039
Longitude: 72.825333

Read More

About Us - We are one of the leading Iron and Steel raw material providers in Mumbai, India

Raj Trading Company is one of the leading Iron and Steel raw material providers in Mumbai, India. The product range that we supply has a diversified span of catering to the requirements of all kinds of industries.

We are authorized dealers of wide range of Iron and steel products that include:

• TMT (Thermo-Mechanically-Treated) Bars
• TOR steel
• IS Beams
• MS Angles
• MS Flats
• MS and GI Pipes
• MS Rounds
• MS Channels
• Sheets and Plates

We assure quick and on time delivery and quality of goods we deliver.
To know more about Iron and Steel products we deal in, please refer our product catalog.

Founded in 1952, Raj Trading Co., has evolved to become a predominant dealer in construction and Industrial Steels and Iron raw materials.
Our products are procured from reliable and trusted vendors who maintain a high benchmark of quality in their manufactured products.

We cater to customers all over Mumbai and its suburbs to various construction projects as well as to Industrial establishments.
We presently occupy a highly respectable position in the Industrial Engineering and construction fields for our transparency, reliability and honesty.

We ensure complete customer satisfaction and devote all our efforts in meeting the customer's requirements and surpassing their expectations.
We have a talented team of professionals and materials handling crew who have the expertise and experience to ensure that the best interests of our clients are served by giving a true value to their trust, time and money bestowed in us.

Read More