TMT Bars

TMT Bars

TMT (Thermo Mechanically Treated) steel bars are a newer variety of steel used for construction purposes.

M.S. (Mild Steel) Pipes and Rounds

M.S. (Mild Steel) Pipes and Rounds

They are available in various structures like pipes, tubes, tubings etc. Our ranges vary from 8 x 8 mm to 150 x 150 mm

Iron and Steel Rods

Iron and Steel Rods

Iron and Steel Rods are widely used in structural applications, Scaffolding, Antenna, Telecom Towers, Water Wells etc. They are available in various size and shapes based on the customers requirements.

Mild Steel Angles

Mild Steel Angles

M.S. (Mild Steel) Angels are made up in accordance with the international quality standards. They are available in ranges of (thickness size in mm) Equal in: 20 X 20, 30 X 30, 40 x 40, 50 x 50 and Unequal in: 30 X 20, 40 X 25, 45 X 30, 50 X 30

Pre Galvanzied Steel Pipes

Galvanized Iron Pipes (Galvanized Iron pipes)

Galvanized Iron Pipes are covered by a layer of zinc. Ranges available with us are: IS:1239, IS:1161, IS:3601, IS:3589, IS:9295, IS:4270, IS:7138, IS:4923, IS:3074, BS:1387, BS:3601, BS:6323

H Beams (I Beams)

H Beams (I Beams)

H Beams (I Beams) are used extensively in constructional activities. We deal in ISMB 80, ISMB 100, ISMB 120, ISMB 140

Steel T beams

Steel T beams

A T-beam is used widely in construction activities. It acts as a load-bearing structure of reinforced concrete, wood or metal, with a t-shaped cross section.

Iron and Steel Sheets

Iron and Steel Sheets

Iron and Steel Sheets and Plates are available in thickness from 0.15 mm to 1.60 mm. These plates are economical to use in flooring and other structural applications.

Mild Steel Channels

Mild Steel Channels

Mild Steel channels, produced using quality steel are well-polished so as to resist corrosion. They are available in ranges of (thickness in mm) 75 X 40, 100 X 50, 125 X 65, 150 X 75

Mild Steel Squares

Mild Steel Squares

M.S. Squares (Mild steel square bars) are plain in surface and have square sections which vary from 8 to 150 mm.

Iron and Steel Sheets, Plates and other construction materials dealer in Mumbai, India

M.S. Sheets (Mild Steel Sheets and Plates) are used in engineering applications and also in certain applications in the automotive sector. Mild Steel plates are economical to use in flooring and other structural applications. Plain sheets are mainly used in sheds of houses, automotive components, warehouses, electrical equipment etc. They are corrosion and abrasion resistance.

Iron and Steel Sheets - Raj Trading Co.

Sheets and plates are mostly used in automotive industries, electrical and electronic goods, panel applications and office equipment and furniture.

Some salient features of M.S. sheets are:
  • Smooth surface 
  • Corrosion resistance 
  • Sturdy construction
  • Cost effective
M.S. Plates are available in thickness ranging from 0.15 mm to 1.60 mm

Mild Steel Squares dealers in South Mumbai

M.S. Squares (Mild steel square bars) are plain in surface and have square sections which vary from 8 to 150 mm in either of their sides. These rods are manufactured in long lengths and are later cut and bent easily without causing any damage. The Rolling tolerance of M.S. Squares is same as that of M.S. round bars.

Mild Steel Squares - Raj Trading Co.

M.S. Squares are used widely for structural needs in domestic applications, furniture industry and automotive products.

Some of their applications are:

  • Guide rails for material handling equipments
  • Support bars for Domestic equipments
  • Manufacturing of automotive vehicles
  • Hardware Industry
  • Petro-chemical Industry
  • Construction applications
  • Electric Instruments
  • Boiler equipments
  • Surgical equipments
  • Food processing
  • Water heating equipments
  • Boat and Ship structures
  • Power mill structures
 The ranges we deal in vary from 8x8 mm to 150x150 mm

Iron and Steel Rounds (Rods) supplier in Mumbai, India

M.S. Rounds (Mild steel rounds) are used for resisting tensile stress of RCC (Reinforced concrete cement) slab beams. These rods are plain in surface and have circular sections of diameter ranging from 6 to 50 mm. They are manufactured in long lengths which later can be cut and bent easily without causing any damage
.
Iron and Steel Rounds (Rods) - Raj Trading Co.

Since M.S. Round Bars posses inherent strength due to their circular cross-section, they are widely used in  applications where multi-directional strength is crucial. They are used mainly in the reinforcement of concrete slabs and beams in constructional industry.

Our range of M.S. Round Bars is available in all sizes and grades and can be availed as per customer needs. Our ranges vary from 80 mm to 130 mm in diameter .

Galvanized Iron Pipes dealers and suppliers in Mumbai, India

G.I. Pipes (Galvanized Iron pipes) are steel pipes that have been covered with a layer of zinc metal by a process called 'Galvanizing'.  During galvanizing, steel is immersed in a molten zinc bath to ensure a hard, smooth barrier of Zinc coating on it. Zinc's natural corrosion resistance provides long-term protection against water corrosion in indoor and outdoor environments

Galvanized Iron Pipes - Raj Trading Co.

G.I. pipes and tubes are used in building and structural materials all over the world. Users seeking long term structural performance in humid outdoor applications have turned to Galvanized steel pipes as they protect against the attack of water, humid or dry winds and road salts.

G.I. Pipes Indian Standards:

  • Indian Standards: Specification IS: 1239 (Part-I) 1990 (Light, Medium & Heavy Series) Black & galvanized, plain end screwed and socketed up to 100 mm NB all series, 125 & 150 mm NB.
  • Indian Standards: Specification IS: 1978-1982 up to 200 mm NB grade & YST - 170 and YST - 210.
  • Indian Standards: Specification IS: 1161-1998 up to 150 mm NB grade & YST - 210 and YST - 240.
  • Indian Standards: Specification IS: 3601-1984 up to 168.3 mm OD and 7.1 mm wall thickness.
  • Indian Standards: Specification IS: 3589-1991 ERW Steel Tubes 150 mm to 400 mm NB.4.
  • Indian Standards: Specification IS: 4270-1992 ERW Steel Tubes for water wells up to 300 mm NB.

 

 Applications:

G.I. steel pipes and tubes are used in Irrigation & Water Supply, Plumbing, Cold Storage Applications, Scaffolding, Antenna, Telecom Towers, Water Wells etc.

G.I. steel pipes and tubes are available in various size and shapes based on the customer's requirements. We deal in G.I. pipes of following ranges:
  • IS:1239,
  • IS:1161,
  • IS:3601,
  • IS:3589,
  • IS:9295,
  • IS:4270,
  • IS:7138,
  • IS:4923,
  • IS:3074,
  • BS:1387,
  • BS:3601,
  • BS:6323

Mild Steel Pipes and Tubes dealers and suppliers in Mumbai, India

M.S. Pipes (Mild Steel Pipes) are pipes made using mild steel containing carbon contents of less than 0.18%. Because of low carbon content they do not get hardened. Mild steel is available in a variety of structural shapes that can be easily welded into pipe, tube, tubing etc. Mild steel pipes and tubes are easy to fabricate, readily available, and cost less than most other metals. In well protected environments, the life expectancy of mild steel pipe is 50 to 100 years.

Mild Steel Pipes and Tubes - Raj Trading Co.

Mild Steel pipes and tubing are used for structural, mechanical & general engineering purposes. It is also used for drinking water supply.
Generally, these pipes are coated with metals such as copper, to protect them from corrosion.  The use of  sodium silicate and chlorination inhibit corrosion in mild steel pipes However, extra care is always required to prevent mild steel pipes from rusting.

Applications: 

Mild Steel pipes are used in furniture industries, domestic applications, bus body,  fencing, Structural Purposes, General Engineering Purposes, Water Steel Pipes.

M.S. Pipes Indian Standards:

  •  IS 1239 
  • Thread Dimension IS: 554: 1999 
  • Idlers & Belt Conveyors IS:9295-1983 
  • Steel Tubes IS: 1161-1998 
  • Pipes conforming to IS:3589-2001 
  • Square Steel Pipes As per IS:4923'97
  • Rectangular Steel Pipes As per IS:4923'97 
  • Lancing Pipes IS : 10577 : 1982 
  • Steel Tubes for Water Wells IS:4270 
  • Screwed & Socketed Butt Joints IS:4270:2001
  • Steel Tubes IS : 3601-2006

Mild Steel Flat Bars and Sheets dealers in Mumbai, India

M.S. (Mild Steel) Flat Bars are used for general fabrication in making structures and frames. Mild steel flat bar can be easily cut and drilled, and are particularly suited for welding.

Mild Steel Flat Bars and Sheets - Raj Trading Co.

Examples of its uses include machinery manufacturing, iron towers, ship-building, railway spare-parts, steel structures, furniture making and boilers.


Some of the key features of Mild Steel Flat Bars include:
  • corrosion resistance, 
  • high functionality,
  • high tensile strength, 
  • resistance to chemicals,
  • longer life.

We deal in a supply of wide variety of Mild Steel Flat Bars and Sheets. Please contact us for more details.

Iron and Steel T-beam suppliers in Mumbai, India

A T-beam (Tee shaped beams) used primarily in construction Industry, is a load-bearing structure often used to reinforce concrete, wood or metal. It has a T-shaped cross section. The top of the T-shaped cross section serves as a flange or compression member in resisting compressive stresses.

Iron and Steel T-beams - Raj Trading Co.

The web of the beam below the compression flange provides resistance to shear stress and provides greater separation for the coupled forces of bending. The interacting flange and web produce the cross section having the typical T-shape.

The T-beam has a big disadvantage compared to an I-beam because it has no bottom flange with which to deal with tensile forces. One way to make a T-beam more efficient structurally is to use an inverted T-beam with a floor slab or bridge-deck joining the tops of the beams. Done properly, the slab acts as the compression flange.

Just like H-Beams, based on their flanges, I-Beams can be classified as:
  1. Squared Beams (W cross-section)
  2. Tapered Beams (S cross-section)

H beams / I beams and other construction materials dealer in South Mumbai, India

An I-beam, also known as H-beam is a beam with an I or H-shaped cross-section. These beams are widely used in construction activities.


Based on their flanges, they can be:
  1. Squared Beams (W cross-section)
  2. Tapered Beams (S cross-section)

In India, I-beams are designated as:
  • ISMB - Indian Standard Medium Weight Beam,
  • ISJB : Indian Standard Junior Beams,
  • ISLB : Indian Standard Light Weight Beams,
  • ISWB : Indian Standard Wide Flange Beams.

Pros:

The I-shaped section is a very efficient form for carrying both bending loads and shear loads. The center piece resists shear forces while the flanges resist most of the bending moment experienced by the beam.

Cons:

The cross-section has a reduced capacity in the transverse direction, and is also inefficient in carrying torsion, for which hollow structural sections are often preferred.


Beams are designated as per respective abbreviated reference followed by the depth of section such as for example ISMB 450, where 450 is the depth of section in millimeters (mm). The dimensions of these beams are classified as per 'Burea of Indian Standards'.

We deal in I Beams of following standard sizes:
  • ISMB 80,
  • ISMB 100,
  • ISMB 120,
  • ISMB 140

Mild Steel Channel dealers in South Mumbai, India

M.S. (Mild Steel) channels are widely used for structural support in construction industry. They are fabricated in various standard sizes and as per weight specifications. These channels are widely used in industries like construction projects, engineering works,metal works and petro-chemical industry.

Mild Steel Channels - Raj Trading Co.

M.S. channels are produced using high quality steel. They are manufactured using roll-formed metal in several shapes and sizes and are well-polished to resist corrosion.

The premium grade material of construction used in fabricating these channels imparts properties like:
  • high performance, 
  • resistance to corrosion, 
  • material strength and 
  • ease of installation.

We supply M.S. channels developed in compliance with the prevalent industry standards for quality by our suppliers. They are available in following ranges of (thickness size in mm):
  • 75 X 40,
  • 100 X 50,
  • 125 X 65,
  • 150 X 75

Dealers of wide range of Mild Steel Angles in Mumbai, India


M.S. Angles (Mild Steel Angles) are made up of high quality steel that imparts high tensile strength and resistivity to rust.
Mild Steel Angles - Raj Trading Co.

M.S. Angles are extensively used in fabrication processes and in industries like automobile, petrochemical, pharmaceutical and energy. These products are used in bracket and transmission line fabrications, trimming, framing and reinforcement of constructions.

We supply superior quality M.S. Angles available in different sizes and dimensions. They are easy to lubricate, sturdy and rust-free. We provide customized ranges as per client's specification at most competitive prices.

They are available in following ranges of (thickness size in mm).
  • Equal:
    • 20 X 20,
    • 25 X 25,
    • 30 X 30,
    • 35 X 35,
    • 40 x 40,
    • 45 x 45,
    • 50 x 50
  • Unequal:
    • 30 X 20,
    • 40 X 25,
    • 45 X 30,
    • 50 X 30

Related Posts Plugin for WordPress, Blogger...